Printing from the WebClient

To open the WebClient, enter http://<hostname>/webclient in the web browser (where hostname corresponds to the server on which the Kyocera Control WebClient was installed). The login screen opens.

Log in with username and password or PIN. Which login methods are available can be defined by the administrator.

Login with PIN: Enter the PIN and click on the green button (you probably received the PIN from the system via e-mail).

Login with user credentials: Under enter your username and under your password (username and password are usually the same as those you use to log in to your PC).

If you do not yet have a favorite printer, select at least one, see Select favorites and direct printer.

Click on My Print Jobs. The list shows all your print jobs that are present in the Print&Follow™ queue.

Select the print jobs by clicking the line or the check mark at the beginning of the line. You can remove the selection by clicking the check mark again.

The number of print jobs to be printed is displayed in small numbers on the button. Click the Print button. All your favorite printers are displayed in the window that opens. Select the desired printer and click Print to start printing. The print job is the output immediately on the selected device (as long as it can meet the requirements of the print job). After printing, the print job is deleted.

The menu which opens when you press the arrow on the print button provides you with further printing options:

• Print all: Prints all print jobs in the list that can be printed by the device. The number is shown in parentheses.
• Print selection: Prints all selected print jobs. This is the standard function of the Print button.
• Print and hold: All selected print jobs are printed, but they are not deleted after printing. This allows you to print them more than once. If the module is missing in the print workflow, the button has no function, see Print and hold module.